Learn how to choose BMPs for each pollutant in your SWPPP, match them to dissolved or particulate fractions, and document them so an inspector can trace each one to a source.
A SWPPP has to describe your site, summarize its potential pollutant sources, and describe the control measures (BMPs) that meet your technology-based and water-quality-based effluent limits, along with schedules and procedures for running them. Pair non-structural practices (housekeeping, spill prevention, training, inspections) with structural or treatment BMPs chosen for each named pollutant and its fraction, particulate or dissolved. Document all of it so an inspector can trace each BMP back to a pollutant source.
What a SWPPP must contain, and where BMPs sit
The 2021 MSGP lists the required contents of a SWPPP: a stormwater pollution prevention team, a site description, a summary of potential pollutant sources, a description of stormwater control measures, and schedules and procedures. The proposed 2026 MSGP opens the SWPPP with the same team element and follows the same structure.
BMPs live in the control-measures section. Each one should answer a source in your summary. State guidance asks you to document the type and location of each control measure and each management practice you carry out.
| SWPPP element | BMP record an inspector checks |
|---|---|
| Summary of pollutant sources | Selection rationale tying each BMP to a named pollutant |
| Control measures | Type and location of each structural and non-structural BMP |
| Schedules and procedures | Maintenance log, inspection checklists, sampling data |
Selecting BMPs from sources, fraction and limits
Start with your sector's typical pollutants. EPA publishes a fact sheet for each of the 29 MSGP sectors listing typical pollutants and the control measures used against them. Then lay the benchmarks or effluent limits in your permit beside those pollutants.
Next, read your lab report for the fraction. If the limit pollutant is largely dissolved, as metals like zinc and copper often are, a sediment control alone does not belong in the plan as the answer to it, because sediment and TSS controls address the particulate fraction and don't bind the dissolved one. Phosphorus can be dissolved or particulate, and bacteria can be free-floating or attached to particles, so the lab split decides.
Before committing, we run a site assessment covering contaminants, flows, available space, effluent targets and maintenance access, and larger jobs can add laboratory column testing on your water and then a pilot. If you pilot, plan influent and effluent sampling so the data holds up later.
Non-structural BMPs every plan should carry
Good housekeeping, spill prevention, preventive maintenance, employee training, routine inspections and recordkeeping cut pollutant generation before rain reaches it. Give each its own written procedure: who does it, how often, and what record it leaves. Spill response and drainage-system maintenance need the most detail.
Structural and treatment BMPs by pollutant
| Pollutant | Fraction | Source control | Treatment BMP |
|---|---|---|---|
| Sediment | Particulate | Sweeping, stabilized storage areas | Capture devices and catch basin inserts; the Ultra-Urban® Filter with Smart Sponge® is an approved stormwater practice in Pennsylvania (2020) |
| Oil and grease | Floating and dissolved hydrocarbons | Spill prevention, drip control | Smart Sponge® hydrophobic media for oil, grease and sheen; skimmers and booms at docks, sumps and outfalls; Smart Sponge® AC for dissolved hydrocarbons and organics |
| Dissolved metals | Dissolved | Cover or contain metal-bearing materials | Smart Sponge® HM media for lead, zinc, copper, arsenic and selenium |
| Bacteria | Free-floating and particle-attached | Waste handling, sanitary controls | Smart Sponge® Plus antimicrobial media, described for E. coli and coliform |
| Phosphorus | Dissolved and particulate | Material storage, fertilizer control | Smart Sponge® HM media, which also targets phosphorus |
Where a basin already exists and there is no power, a passive insert like the Ultra-Urban® Filter fits; it retrofits existing basins and runs without pumps or power. Larger drainage areas can put media in vaults or other treatment structures, and Smart Skid systems add pumps, pressure and flow controls where you need packaged treatment.
Inspecting, maintaining and revising BMPs
Set inspection and maintenance schedules from local climate, and log every service, inspection and corrective action. EPA provides a form for recording monitoring, inspection, maintenance, visual evaluation and corrective action.
When monitoring shows a BMP isn't cutting the pollutant, tighten source controls first. Then add or change treatment matched to the fraction.
For media-based BMPs, plan access for inspection, media replacement and handling of spent material. Spent sponge passes the EPA leach test (TCLP) and goes to a landfill, waste-to-energy plant or cement kiln as ordinary solid waste.
Mistakes that turn BMPs into permit violations
Two gaps cause trouble that the sections above don't cover. The first is a BMP written into the plan but missing on site, or installed somewhere other than the location the plan states. The second is a plan left unrevised after a source changes, such as a new material storage area, a changed process or a relocated fueling point, so the summary no longer matches what is on the ground.
Walk the site against the plan before an inspector does, and update the source summary and BMP list whenever activities change. For how inspectors weigh a documented BMP, see our post on what counts as an NPDES permit stormwater BMP.
What should you do once you know which pollutant is the problem?
Get the dissolved-versus-particulate split from your lab report, then schedule a site assessment so the treatment BMP is matched to your water before you write it into the plan.
